25mm Standard End Brackets

Product Overview

Their versatile design works with 25mm steel, aluminum, or PVC tubes, making them a go-to choice for contractors and DIYers working on diverse projects. Unlike specialized brackets that require proprietary hardware, these use standard M8 bolts (included) and fit most power drills, simplifying installation. The galvanized finish resists rust in moderately humid environments (e.g., garages or laundry rooms), while the open-top tube holder allows quick tube placement—ideal for time-sensitive projects like rental property renovations.

Product Specifications

• Material: Hot-dipped galvanized steel (zinc coating: 60μm thickness; meets EN 10346 standard)

• Tube Compatibility: Exclusively for 25mm outer-diameter round tubes (tolerance: ±0.1mm)

• Load Capacity: Up to 88 lbs (40 kg) per bracket when mounted to wood studs; 55 lbs (25 kg) for drywall (with heavy-duty anchors)

• Dimensions: (L) 32mm × (W) 28mm × (H) 24mm (thicker gauge: 2mm for added strength)

• Mounting Type: Dual-hole design (M8 bolts, 30mm center-to-center spacing; 30mm-long bolts and lock washers included)

• Finish: Hot-dipped galvanized (silver-gray; resists white rust for 2+ years in indoor use)

• Testing: Passes 72-hour salt spray testing (ISO 9227) for moderate humidity; suitable for garages or laundry rooms

• Installation Requirement: Minimum tube insertion depth of 40mm (1.6") to ensure load capacity

Features

• Enhanced Corrosion Resistance: Hot-dipped galvanizing (60μm zinc coating) offers 3× better rust protection than standard zinc plating, making it suitable for garages, laundry rooms, or covered porches.

• Heavy-Duty Support: 88lb load capacity supports large items like cast-iron Dutch ovens (on kitchen pot racks) or full winter coat collections (in bedroom closets).

• Easy Installation: Pre-drilled holes align with standard wall studs, and included M8 bolts fit most drill bits. The open-top design allows tube placement without sliding from the end—saves 50% of installation time compared to closed-end brackets.

• Versatile Compatibility: Works with 25mm steel, aluminum, or PVC tubes, making it ideal for mixed-material projects (e.g., aluminum closet rods with galvanized brackets).

• Cost-Effective: Priced 40% lower than stainless steel alternatives, while still outlasting plastic brackets by 10+ years.

• Impact Resistant: Hot-dipped galvanized steel resists dents from accidental impacts (e.g., dropping tools in garages), maintaining structural integrity.

Applications

Perfect for heavy-duty, budget-conscious projects:

• Garage Storage: End supports for 25mm tool racks (holds hammers, drills, or leaf blowers) or ladder storage rails.

• Residential Kitchens: 25mm pot racks above stovetops (supports large cookware) or pantry storage rails for bulk food items (e.g., cereal boxes or canned goods).

• Laundry Rooms: Towel racks for heavy wet towels or drying racks for clothes (resists humidity from dryers).

• Light Industrial: Small workshop tool rails, inventory racks for small parts, and assembly line supports for lightweight components.

FAQ

Q: What’s the difference between hot-dipped galvanized steel and standard zinc-plated steel?

A: Hot-dipped galvanizing involves dipping steel in molten zinc (60μm coating), while zinc plating uses an electroplating process (8-15μm coating). Hot-dipped galvanizing offers 3× better corrosion resistance, making it suitable for humid areas like garages or laundry rooms.

Q: Can these be used with PVC tubes, and will the weight cause the plastic to bend?

A: Yes, they work with 25mm PVC tubes, but we recommend limiting the load to 55lbs (25 kg) to avoid PVC bending. For heavier loads, use 25mm steel or aluminum tubes to match the bracket’s 88lb capacity.

Q: Are drywall anchors included, and what type should I use for heavy loads?

A: Heavy-duty drywall anchors (rated for 55lbs) are included—suitable for standard 12mm drywall. For thicker drywall (16mm+) or heavier loads, use toggle bolts (rated for 100lbs+) available at hardware stores.

Q: How do I prevent the tube from rotating in the bracket?

A: For fixed installations, drill a 2mm hole through the bracket and tube (once aligned) and insert a stainless steel pin (included in bulk orders). For temporary setups, apply a small amount of rubber adhesive to the tube end before insertion—this adds friction without damaging the tube.